Keysight x-series Instruction Manual

6 Input/Output
6.4 Data Source
You can also see that the control indicator on the measurement bar has an “F” in it
and the playback symbol (right facing triangle) displayed:
This indicates that the instrument is in Continuous Playback mode and is using data
from a File.
If you select Single in the control dropdown, the indicator will change to show that it
is in Single Pause mode as below:
Short Range Comms & IoT Mode User's &Programmer's Reference 2108

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)