Port Mapping Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 28-3
Examples
-> port mapping 3 user-port 2/3 network-port 6/4
-> port mapping 4 user-port 2/5-8
-> port mapping 5 user-port 2/3 network-port slot 3
-> port mapping 5 no user-port 2/3
-> port mapping 6 no network-port linkagg 7
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
PortMappingSessionTable
pmapSessionNumber
portMappingTable
pmapPortIfindex
pmapPortType
port mapping Enables, disables, or deletes a port mapping session.
port mapping Configures the direction of a port mapping session.
show port mapping Displays the configuration of one or more port mapping sessions.
To Next Page
Loading...
