Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-31
Possible values for command domains and families are listed here:
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
SessionActive
sessionIndex
sessionAccessType
sessionPhysicalPort
sessionUserName
sessionUserReadPrivileges
sessionUserWritePrivileges
sessionUserProfileNumber
sessionUserIpAddress
sessionRowStatus
Ip Address User IP address.
Read-only domains The command domains available with the user’s read-only access. See
the table beginning on page 6-31 for a listing of valid domains.
Read-only families The command families available with the user’s read-only access. See
the table beginning on page 6-31 for a listing of valid families.
Read-Write domains The command domains available with the user’s read-write access. See
the table beginning on page 6-31 for a listing of valid domains.
Read-Write families The command families available with the user’s read-write access. See
the table beginning on page 6-31 for a listing of valid families.
End-User Profile The name of an end-user profile associated with the user.
domain families
domain-admin file image bootrom telnet reset dshell debug
domain-system system aip snmp rmon webmgt config
domain-physical chassis module interface pmm flood health
domain-network ip rip iprm ipmr ipms
domain-layer2 vlan bridge stp 802.1q linkagg ip-helper
domain-service ldap dhcp dns
domain-security session binding avlan aaa
whoami Displays current user session.
kill Kills another user’s session.
output definitions (continued)
To Next Page
Loading...
