Link Aggregation Commands
page 12-46 OmniSwitch 6250 CLI Reference Guide November 2009
A dynamic aggregate group is specified:
-> show linkagg 2
Dynamic Aggregate
SNMP Id : 40000002,
Aggregate Number : 2,
SNMP Descriptor : Dynamic Aggregate Number 2 ref 40000002 size 4,
Name : AGG 2,
Admin State : ENABLED,
Operational State : DOWN,
Aggregate Size : 4,
Number of Selected Ports : 0,
Number of Reserved Ports : 0,
Number of Attached Ports : 0,
Primary Port : NONE,
LACP
MACAddress : [00:1f:cc:00:00:00],
Actor System Id : [00:20:da:81:d5:b0],
Actor System Priority : 50,
Actor Admin Key : 120,
Actor Oper Key : 0,
Partner System Id : [00:20:da:81:d5:b1],
Partner System Priority : 70,
Partner Admin Key : 220,
Partner Oper Key : 0
Output fields are defined here:
Number of Attached Ports The number of ports actually attached to this static aggregate group.
Primary Port The port number of the first port to join this static aggregate group. If
the first port to join the aggregate is no longer part of the aggregate
group, the switch automatically assigns another port in the aggregate
group to be the primary port.
output definitions
SNMP Id The SNMP ID associated with this dynamic aggregate group.
Aggregate Number The group number of this dynamic aggregate group.
SNMP Descriptor The standard MIB name for this dynamic aggregate group.
Name The name of this dynamic aggregate group. You can modify this param-
eter with the lacp linkagg name command (see page 12-11).
Admin State The administrative state of this dynamic aggregate group, which can be
ENABLED or DISABLED. You can modify this parameter with the
lacp linkagg admin state command (see page 12-12).
Operational State The operational state of this dynamic aggregate group, which can be
UP or DOWN.
Aggregate Size The number of links configured for this dynamic aggregate group.
Number of Selected Ports The number of ports available to this dynamic aggregate group.
Number of Reserved Ports The total number of ports reserved for use in link aggregation by this
dynamic aggregate group.
Number of Attached Ports The number of ports actually attached to this dynamic aggregate group.
output definitions (continued)
To Next Page
Loading...
