Link Aggregation Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 12-47
Release History
Release 6.6.1; command was introduced.
Related Commands
Primary Port The port number of the first port to join this dynamic aggregate group.
If the first port to join the aggregate group is no longer part of the
aggregate group, the switch automatically assigns another port in the
aggregate group to be the primary port.
MACAddress The MAC address associated with the primary port.
Actor System Id The MAC address of this dynamic aggregate group. You can modify
this parameter with the lacp linkagg actor system id command (see
page 12-16).
Actor System Priority The priority of this dynamic aggregate group. You can modify this
parameter with the lacp linkagg actor system priority command (see
page 12-15).
Actor Admin Key The administrative key associated with this dynamic aggregate group.
You can modify this parameter with the lacp linkagg actor admin key
command (see page 12-14).
Actor Oper Key The operational key associated with this dynamic aggregate group.
Partner System Id The MAC address of the remote dynamic aggregate group. You can
modify this parameter with the lacp linkagg partner system id com-
mand (see page 12-17).
Partner System Priority The priority of the remote system to which this dynamic aggregation
group is attached. You can modify this parameter with the lacp linkagg
partner system priority command (see page 12-19).
Partner Admin Key The administrative key for this dynamic aggregation group’s remote
partner. You can modify this parameter with the lacp linkagg partner
admin key command (see page 12-20).
Partner Oper Key The operational key of the remote system to which the dynamic aggre-
gation group is attached.
static linkagg size Creates a static aggregate group.
lacp linkagg size Creates a dynamic aggregate group.
output definitions (continued)
To Next Page
Loading...
