Link Aggregation Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 12-53
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggPortTable
alclnkaggAggPortActorSystem
alclnkaggAggPortActorSystemPriority
alclnkaggAggPortActorSystemID
alclnkaggAggPortActorAdminKey
alclnkaggAggPortActorOperKey
alclnkaggAggPortPartnerAdminSystemPriority
alclnkaggAggPortPartnerOperSystemPriority
alclnkaggAggPortPartnerAdminSystemID
alclnkaggAggPortPartnerOperSystemID
alclnkaggAggPortPartnerAdminKey
alclnkaggAggPortPartnerOperKey
alclnkaggAggPortSelectedAggID
alclnkaggAggPortAttachedAggID
alclnkaggAggPortActorPort
alclnkaggAggPortActorPortPriority
alclnkaggAggPortPartnerAdminPort
alclnkaggAggPortPartnerOperPort
alclnkaggAggPortPartnerAdminPortPriority
alclnkaggAggPortPartnerOperPortPriority
alclnkaggAggPortActorAdminState
alclnkaggAggPortActorOperState
alclnkaggAggPortPartnerAdminState
alclnkaggAggPortPartnerOperState
Actor Admin State The administrative state of the port. You can modify this parameter
with the lacp agg actor admin state command (see page 12-24).
Actor Oper State The current operational state of the port.
Partner Admin State The administrative state of the partner’s port. You can modify this
parameter with the lacp agg partner admin state command (see page
12-30).
Partner Oper State The current operational state of the partner’s port.
static agg agg num Configures a slot and port for a static aggregate group.
lacp agg actor admin key Configures a slot and port for a dynamic aggregate group.
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.
output definitions (continued)
To Next Page
Loading...
