Link Aggregation Commands
page 12-52 OmniSwitch 6250 CLI Reference Guide November 2009
Actor System Priority The actor system priority of this port. You can modify this parameter
with the lacp agg actor system priority command (see page 12-28).
Actor System Id The actor system ID (i.e., MAC address) of this port. You can modify
this parameter with the lacp agg actor system id command (see page
12-26).
Actor Admin Key The actor administrative key value for this port. You can modify this
parameter with the lacp agg actor admin key command (see page
12-21).
Actor Oper Key The actor operational key associated with this port.
Partner Admin System
Priority
The administrative priority of the remote system to which this port is
attached. You can modify this parameter with the lacp agg partner
admin system priority command (see page 12-36).
Partner Oper System Priority The operational priority of the remote system to which this port is
attached.
Partner Admin System Id The administrative MAC address associated with the remote partner’s
system ID. This value is used along with Partner Admin System Prior-
ity, Partner Admin Key, and Partner Admin Port Priority to manually
configure aggregation. You can modify this parameter with the lacp
agg partner admin system id command (see page 12-32).
Partner Oper System id The MAC address that corresponds to the remote partner’s system ID.
Partner Admin Key The administrative value of the key for the remote partner. This value is
used along with Partner Admin System Priority, Partner Admin System,
Partner Admin Port, and Partner Admin Port Priority to manually con-
figure aggregation. You can modify this parameter with the lacp agg
partner admin key command (see page 12-34).
Partner Oper Key The current operational value of the key for the protocol partner.
Attached Agg ID The ID of the aggregate group that the port has attached itself to. A
value of zero indicates that the port is not attached to an aggregate
group.
Actor Port The port number locally assigned to this port.
Actor Port Priority The actor priority value assigned to the port. You can modify this
parameter with the lacp agg actor port priority command (see page
12-38).
Partner Admin Port The administrative value of the port number for the protocol partner.
This value is used along with Partner Admin System Priority, Partner
Admin System ID, Partner Admin Key, and Partner Admin Port Prior-
ity to manually configure aggregation. You can modify this parameter
with the lacp agg partner admin port command (see page 12-40).
Partner Oper Port The operational port number assigned to the port by the port’s protocol
partner.
Partner Admin Port Priority The administrative port priority of the protocol partner. This value is
used along with Partner Admin System Priority, Partner Admin System
ID, and Partner Admin Key to manually configure aggregation.
You can modify this parameter with the lacp agg partner admin port
priority
command (see page 12-42).
Partner Oper Port Priority The priority value assigned to the this port by the partner.
output definitions (continued)
To Next Page
Loading...
