Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-139
-> bridge mode flat
-> bridge protocol mstp
-> show spantree ports
Msti Port Oper Status Path Cost Role
-----+-----+------------+---------+-----
0 1/1 FORW 200000 ROOT
0 1/2 DIS 0 DIS
0 1/3 DIS 0 DIS
0 1/4 DIS 0 DIS
0 1/5 DIS 0 DIS
0 1/6 DIS 0 DIS
0 1/7 DIS 0 DIS
0 1/8 DIS 0 DIS
0 1/9 DIS 0 DIS
0 1/10 DIS 0 DIS
0 1/11 DIS 0 DIS
0 1/12 DIS 0 DIS
0 1/13 DIS 0 DIS
0 1/14 DIS 0 DIS
0 1/15 DIS 0 DIS
0 1/16 DIS 0 DIS
0 1/17 DIS 0 DIS
0 1/18 DIS 0 DIS
0 1/19 DIS 0 DIS
0 1/20 DIS 0 DIS
0 1/21 DIS 0 DIS
Man. Mode The manual mode setting for the port: yes indicates that the blocking or
forwarding state of the port was manually set and the port does not par-
ticipate in the Spanning Tree Algorithm; no indicates that the Spanning
Tree Algorithm is managing the port state. Configured through the
bridge slot/port mode command.
Config Cost The configured path cost value for this port. Configured through the
bridge slot/port path cost command.
Adm Cnx The administrative connection type: PTP, NPT, or AUT. Configured
through the bridge slot/port connection command.
Adm Edg The edge port administrative status: yes indicates that the port is an
admin edge port; no indicates that the port is not an admin edge port.
Configured through the bridge slot/port connection command.
Aut Edg The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the bridge cist slot/port auto-edge or bridge 1x1
slot/port auto-edge command.
Rstr Tcn The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the bridge cist slot/
port restricted-tcn or bridge 1x1 slot/port restricted-tcn command.
Rstr Role The restricted role port status: yes indicates that the port is a restricted
role port; no indicates that the port is not a restricted role port. Config-
ured through the bridge cist slot/port restricted-role or bridge 1x1
slot/port restricted-role command.
OS8800 10G Opt. N/A
output definitions
To Next Page
Loading...
