Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1003
:SBUS<n>:MANChester:BITorder
(see page 1610)
Command Syntax
:SBUS<n>:MANChester:BITorder <bitorder>
<bitorder> ::= {MSBFirst | LSBFirst}
When the display format is WORD (see :SBUS<n>:MANChester:DISPlay), the
:SBUS<n>:MANChester:BITorder command specifies the order of transmission on
the Manchester bus:
• MSBFirst — specifies the most significant bit is transmitted first.
• LSBFirst — specifies the least significant bit is transmitted first.
Query Syntax
:SBUS<n>:MANChester:BITorder?
The :SBUS<n>:MANChester:BITorder? query returns the bit order setting.
Return Format
<bitorder><NL>
<bitorder> ::= {MSBF | LSBF}
See Also • ":SBUS<n>:MANChester:BASE" on page 1001
• ":SBUS<n>:MANChester:IDLE:BITS" on page 1007
• ":SBUS<n>:MANChester:LOGic" on page 1008
• ":SBUS<n>:MANChester:STARt" on page 1011

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English