EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1364 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :TRIGger Commands
:TRIGger:RUNT:TIME
(see page 1610)
Command Syntax
:TRIGger:RUNT:TIME <time>[suffix]
<time> ::= floating-point number in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
When triggering on runt pulses whose width is greater than or less than a certain
value (see :TRIGger:RUNT:QUALifier), the :TRIGger:RUNT:TIME command
specifies the time used with the qualifier.
Query Syntax
:TRIGger:RUNT:TIME?
The :TRIGger:RUNT:TIME? query returns the current runt pulse qualifier time
setting.
Return Format
<time><NL>
<time> ::= floating-point number in NR3 format
See Also "Introduction to :TRIGger Commands" on page 1295
":TRIGger:RUNT:QUALifier" on page 1362

Table of Contents

Related product manuals