Keysight Technologies InfiniiVision 4000 X Series User Manual

738 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:HARMonics:FAILcount
(see page 1610)
Query Syntax
:POWer:HARMonics:FAILcount?
Returns the current harmonics analysis' fail count. Non Spec values (that is,
harmonics values not specified by the selected standard) are not counted.
Return Format
<count><NL>
<count> ::= integer in NR1 format
See Also • ":POWer:HARMonics:RUNCount" on page 743
• ":POWer:HARMonics:APPLy" on page 735
• ":POWer:HARMonics:DATA" on page 736
• ":POWer:HARMonics:DISPlay" on page 737
• ":POWer:HARMonics:LINE" on page 739
• ":POWer:HARMonics:POWerfactor" on page 740
• ":POWer:HARMonics:STANdard" on page 744
• ":POWer:HARMonics:STATus" on page 745
• ":POWer:HARMonics:THD" on page 746

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English