1428 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
36 :WAVeform Commands
:WAVeform:YINCrement
(see page 1610)
Query Syntax
:WAVeform:YINCrement?
The :WAVeform:YINCrement? query returns the y-increment value in volts for the
currently specified source. This value is the voltage difference between
consecutive data values. The y-increment for digital waveforms is always "1".
Return Format
<value><NL>
<value> ::= y-increment value in the current preamble in 32-bit
floating point NR3 format
See Also • "Introduction to :WAVeform Commands" on page 1396
• ":WAVeform:PREamble" on page 1410
Example Code • "Example Code" on page 1411
To Next Page
Loading...
