Keysight Technologies InfiniiVision 4000 X Series

442 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
19 :FRANalysis Commands
:FRANalysis:ENABle
(see page 1610)
Command Syntax
:FRANalysis:ENABle <setting>
<setting> ::= {{0 | OFF} | {1 | ON}}
The :FRANalysis:ENABle command turns the Frequency Response Analysis (FRA)
feature on or off.
Query Syntax
:FRANalysis:ENABle?
The :FRANalysis:ENABle? query returns a flag indicating whether the Frequency
Response Analysis (FRA) feature is on or off.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":FRANalysis:DATA" on page 441
• ":FRANalysis:FREQuency:STARt" on page 445
• ":FRANalysis:FREQuency:STOP" on page 446
• ":FRANalysis:RUN" on page 448
• ":FRANalysis:SOURce:INPut" on page 449
• ":FRANalysis:SOURce:OUTPut" on page 450
• ":FRANalysis:WGEN:LOAD" on page 452
• ":FRANalysis:WGEN:VOLTage" on page 453