Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1177
:SEARch:TRANsition:SLOPe
(see page 1610)
Command Syntax
:SEARch:TRANsition:SLOPe <slope>
<slope> ::= {NEGative | POSitive}
The :SEARch:TRANsition:SLOPe command selects whether to search for rising
edge (POSitive slope) transitions or falling edge (NEGative slope) transitions.
Query Syntax
:SEARch:TRANsition:SLOPe?
The :SEARch:TRANsition:SLOPe? query returns the current transition search slope
setting.
Return Format
<slope><NL>
<slope> ::= {NEG | POS}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:MODE" on page 1153
• ":SEARch:TRANsition:SOURce" on page 1178
• ":SEARch:TRANsition:TIME" on page 1179

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English