Keysight Technologies InfiniiVision 4000 X Series User Manual

620 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
24 :MEASure Commands
:MEASure:STATistics:MCOunt
(see page 1610)
Command Syntax
:MEASure:STATistics:MCOunt <setting>
<setting> ::= {INFinite | <count>}
<count> ::= 2 to 2000 in NR1 format
The :MEASure:STATistics:MCOunt command specifies the maximum number of
values used when calculating measurement statistics.
Query Syntax
:MEASure:STATistics:MCOunt?
The :MEASure:STATistics:MCOunt? query returns the current measurement
statistics max count setting.
Return Format
<setting><NL>
<setting> ::= {INF | <count>}
<count> ::= 2 to 2000
See Also • "Introduction to :MEASure Commands" on page 568
• ":MEASure:RESults" on page 608
• ":MEASure:STATistics" on page 617
• ":MEASure:STATistics:DISPlay" on page 618
• ":MEASure:STATistics:RSDeviation" on page 622
• ":MEASure:STATistics:RESet" on page 621
• ":MEASure:STATistics:INCRement" on page 619

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English