Keysight Technologies InfiniiVision 4000 X Series User Manual

904 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage
(see page 1610)
Command Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage <name>
<name> ::= quoted ASCII string
The :SBUS<n>:CAN:TRIGger:SYMBolic:MESSage command specifies the message
to trigger on when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN trigger mode is set to MESSage or MSIGnal.
Query Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage?
The :SBUS<n>:CAN:TRIGger:SYMBolic:MESSage? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:DBC[:STARt]" on page 813
• ":SBUS<n>:CAN:TRIGger" on page 894
• ":SBUS<n>:CAN:TRIGger:SYMBolic:SIGNal" on page 905
• ":SBUS<n>:CAN:TRIGger:SYMBolic:VALue" on page 906

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English