Keysight Technologies InfiniiVision 4000 X Series User Manual

:SAVE Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 833
:SAVE:LISTer[:STARt]
(see page 1610)
Command Syntax
:SAVE:LISTer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:LISTer[:STARt] command saves the Lister display data to a file.
See Also • "Introduction to :SAVE Commands" on page 824
• ":SAVE:FILename" on page 827
• Chapter 22, “:LISTer Commands,” starting on page 523
NOTE
If a file extension is provided as part of a specified <file_name>, it must be ".csv".

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English