750 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:ITYPe
(see page 1610)
Command Syntax
:POWer:ITYPe <type>
<type> ::= {DC | AC}
The :POWer:ITYPe command specifies the type of power that is being converted
from the input (DC or AC). Your selection affects how the measurements are made.
This setting is used in the Inrush Current and Turn On/Turn Off tests.
Query Syntax
:POWer:ITYPe?
The :POWer:ITYPe? query returns the input power type setting.
Return Format
<type><NL>
<type> ::= {DC | AC}
See Also • ":POWer:INRush:APPLy" on page 747
• ":POWer:ONOFf:APPLy" on page 754
To Next Page
Loading...
