1232 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:SENT:SLOW:ID
(see page 1610)
Command Syntax
:SEARch:SERial:SENT:SLOW:ID <id>
<id> ::= from -1 (don't care) to 255, in NR1 format.
The :SEARch:SERial:SENT:SLOW:ID command specifies the ID to search for in the
"Slow Channel Message ID" and "Slow Channel Message ID & Data" trigger
modes. The ID can be from -1 (don't care) to 255 (depending on the message
length).
Query Syntax
:SEARch:SERial:SENT:SLOW:ID?
The :SEARch:SERial:SENT:SLOW:ID? query returns the slow channel ID search
value setting.
Return Format
<id><NL>
<id> ::= from -1 (don't care) to 255, in NR1 format.
See Also • ":SEARch:SERial:SENT:FAST:DATA" on page 1229
• ":SEARch:SERial:SENT:MODE" on page 1230
• ":SEARch:SERial:SENT:SLOW:DATA" on page 1231
To Next Page
Loading...
