Keysight Technologies InfiniiVision 4000 X Series User Manual

404 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
16 :DISPlay Commands
:DISPlay:ANNotation<n>
(see page 1610)
Command Syntax
:DISPlay:ANNotation<n> <setting>
<setting> ::= {{1 | ON} | {0 | OFF}}
<n> ::= an integer from 1 to 10 in NR1 format.
The :DISPlay:ANNotation<n> command turns the annotation on and off. When on,
the annotation appears in the upper left corner of the oscilloscope's display.
The annotation is useful for documentation purposes, to add notes before
capturing screens.
Query Syntax
:DISPlay:ANNotation<n>?
The :DISPlay:ANNotation<n>? query returns the annotation setting.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also • ":DISPlay:ANNotation<n>:TEXT" on page 407
• ":DISPlay:ANNotation<n>:COLor" on page 406
• ":DISPlay:ANNotation<n>:BACKground" on page 405
• ":DISPlay:ANNotation<n>:X1Position" on page 408
• ":DISPlay:ANNotation<n>:Y1Position" on page 409
• "Introduction to :DISPlay Commands" on page 403

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English