372 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
12 :COMPliance Commands
:COMPliance:USB:SOURce:DIFFerential
(see page 1610)
Command Syntax
:COMPliance:USB:SOURce:DIFFerential <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :COMPliance:USB:SOURce:DIFFerential command specifies the analog input
channel whose differential probe is connected to the Hi-Speed signal to be tested.
Query Syntax
:COMPliance:USB:SOURce:DIFFerential?
The :COMPliance:USB:SOURce:DIFFerential? query returns the specified analog
input channel.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also • ":COMPliance:USB:TEST" on page 375
• ":COMPliance:USB:TEST:CONNection" on page 376
To Next Page
Loading...
