Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 899
:SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC
(see page 1610)
Command Syntax
:SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC <dlc>
<dlc> ::= integer between -1 (don't care) and 64, in NR1 format.
The :SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC command specifies the DLC value
to be used in the CAN FD data trigger mode. A specific valid FD value can be
specified, or -1 can be specified to indicate "don't care".
Query Syntax
:SBUS<n>:CAN:TRIGger:PATTern:DATA:STARt?
The :SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC? query returns the currently set
DLC value.
Return Format
<dlc><NL>
<dlc> ::= integer between -1 (don't care) and 64, in NR1 format.
See Also • ":SBUS<n>:CAN:TRIGger:PATTern:DATA" on page 898

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English