Keysight Technologies InfiniiVision 4000 X Series User Manual

:DISPlay Commands 16
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 425
:DISPlay:VECTors
(see page 1610)
Command Syntax
:DISPlay:VECTors <vectors>
<vectors> ::= {{1 | ON} | {0 | OFF}}
The :DISPlay:VECTors command turns vector display on or off.
When vectors are turned on, the oscilloscope displays lines connecting sampled
data points.
On the 1GHz and 1.5GHz bandwidth models, you can turn off vectors to view just
waveform data points.
Query Syntax
:DISPlay:VECTors?
The :DISPlay:VECTors? query returns the vectors setting.
Return Format
<vectors><NL>
<vectors> ::= {1 | 0}
See Also • "Introduction to :DISPlay Commands" on page 403

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English