Keysight Technologies InfiniiVision 4000 X Series User Manual

1014 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA
(see page 1610)
Command Syntax
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA <string>
<string> ::= "nn...n" where n ::= {0 |1|X|$}
<string ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X | $}
When the VALue trigger mode is selected (:SBUS<n>:MANChester:TRIGger), the
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA command specifies the
value to trigger on.
Note that the trigger value bit order is always for bits as they arrive (that is, MSB
first) regardless of the serial decode bit order setting (in
:SBUS<n>:MANChester:BITorder).
The bit width (length) of the value is set with the
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:WIDTh command.
Query Syntax
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA?
The :SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA? query returns the
specified trigger value as a string of binary digits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 |1|X|$}
See Also • ":SBUS<n>:MANChester:BITorder" on page 1003
• ":SBUS<n>:MANChester:TRIGger" on page 1013
• ":SBUS<n>:MANChester:TRIGger:PATTern:VALue:WIDTh" on page 1015

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English