Keysight Technologies InfiniiVision 4000 X Series

Commands Quick Reference 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 123
n/a :HCOPY:SDUMp:DATA?
(see page 521)
<display_data> ::= binary block
data in IEEE-488.2 # format.
:HCOPY:SDUMp:FORMat
<format> (see
page 522)
:HCOPY:SDUMp:FORMat?
(see page 522)
<format> ::= {BMP | BMP8bit |
PNG}
Table 17 :HARDcopy/:HCOPY Commands Summary (continued)
Command Query Options and Query Returns
Table 18 :LISTer Commands Summary
Command Query Options and Query Returns
n/a :LISTer:DATA? (see
page 524)
<binary_block> ::=
comma-separated data with
newlines at the end of each row
:LISTer:DISPlay {{OFF
| 0} | {SBUS1 | ON |
1} | {SBUS2 | 2} |
ALL} (see page 525)
:LISTer:DISPlay? (see
page 525)
{OFF | SBUS1 | SBUS2 | ALL}
:LISTer:REFerence
<time_ref> (see
page 526)
:LISTer:REFerence?
(see page 526)
<time_ref> ::= {TRIGger |
PREVious}
Table 19 :MARKer Commands Summary
Command Query Options and Query Returns
n/a :MARKer:DYDX? (see
page 530)
<return_value> ::= •Y/•X value in
NR3 format
:MARKer:MODE <mode>
(see page 531)
:MARKer:MODE? (see
page 531)
<mode> ::= {OFF | MEASurement |
MANual | WAVeform | BINary | HEX}
:MARKer:X1:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 532)
:MARKer:X1:DISPlay?
(see page 532)
<setting> ::= {0 | 1}
:MARKer:X1Position
<position>[suffix]
(see page 533)
:MARKer:X1Position?
(see page 533)
<position> ::= X1 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns |
ps | Hz | kHz | MHz}
<return_value> ::= X1 cursor
position value in NR3 format