Keysight Technologies InfiniiVision 4000 X Series

532 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
23 :MARKer Commands
:MARKer:X1:DISPlay
(see page 1610)
Command Syntax
:MARKer:X1:DISPlay {{0 | OFF} | {1 | ON}}
The :MARKer:X1:DISPlay command specifies whether the X1 cursor is displayed.
Query Syntax
:MARKer:X1:DISPlay?
The :MARKer:X1:DISPlay? query returns the X1 cursor display setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":MARKer:X1:DISPlay" on page 532