EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 911
:SBUS<n>:CXPI:SOURce
(see page 1610)
Command Syntax
:SBUS<n>:CXPI:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:CXPI:SOURce command selects the oscilloscope channel
connected to the CXPI signal line.
Query Syntax
:SBUS<n>:CXPI:SOURce?
The :SBUS<n>:CXPI:SOURce? query returns the selected oscilloscope channel
source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also ":SBUS<n>:CXPI:BAUDrate" on page 909
":SBUS<n>:CXPI:PARity" on page 910
":SBUS<n>:CXPI:TOLerance" on page 912
":SBUS<n>:CXPI:TRIGger" on page 913

Table of Contents

Related product manuals