Keysight Technologies InfiniiVision 4000 X Series

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1145
:SBUS<n>:USBPd:TRIGger:HEADer:EMESsage
(see page 1610)
Command Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:EMESsage <type>
<type> ::= {SCX | STATus | GBCap | GBSTatus | BCAP | GMINfo | MINFo
| SREQuest | SRESponse | FREQuest | FRESponse | PSTatus | CINFo
| CCODes}
When the Header Content trigger mode is selected (with the
":SBUS<n>:USBPd:TRIGger HEADer" command) and the Extended Message header
type is selected (with the ":SBUS<n>:USBPd:TRIGger:HEADer EMESsage"
command), the :SBUS<n>:USBPd:TRIGger:HEADer:EMESsage command selects
the extended message type:
• SCX — Source_Capabilities_Extended
•STATus — Status
• GBCap — Get_Battery_Cap
• GBSTatus — Get_Battery_Status
• BCAP — Battery_Capabilities
• GMINfo — Get_Manufacturer_Info
• MINFo — Manufacturer_Info
• SREQuest — Security_Request
• SRESponse — Security_Response
•FREQuest — Firmware_Update_Request
• FRESponse — Firmware_Update_Response
• PSTatus — PPS_Status
• CINFo — Country_Info
• CCODes — Country_Codes
Query Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:EMESsage?
The :SBUS<n>:USBPd:TRIGger:HEADer:EMESsage? query returns the selected
extended message type
Return Format
<type><NL>
<type> ::= {SCX | STATus | GBC | GBST | BCAP | GMIN | MINF | SREQ
| SRES | FREQ | FRES | PSTatus | CINF | CCOD}
See Also • ":SBUS<n>:USBPd:SOURce" on page 1138
• ":SBUS<n>:USBPd:TRIGger" on page 1139
• ":SBUS<n>:USBPd:TRIGger:HEADer" on page 1140
• ":SBUS<n>:USBPd:TRIGger:HEADer:CMESsage" on page 1142