To Next Page

To Previous Page

:MEASure Commands 24

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 633

:MEASure:VPP

(see page 1610)

Command Syntax

:MEASure:VPP [<source>]

<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

The :MEASure:VPP command installs a screen measurement and starts a vertical

peak-to-peak measurement. If the optional source parameter is specified, the

current source is modified.

Query Syntax

:MEASure:VPP? [<source>]

The :MEASure:VPP? query measures the maximum and minimum vertical value for

the selected source, then calculates the vertical peak-to-peak value and returns

that value. The peak-to-peak value (Vpp) is calculated with the following formula:

Vpp = Vmax - Vmin

Vmax and Vmin are the vertical maximum and minimum values present on the

selected source.

Return Format

<value> ::= vertical peak to peak value in NR3 format

See Also • "Introduction to :MEASure Commands" on page 568

• ":MEASure:SOURce" on page 615

• ":MEASure:VMAX" on page 631

• ":MEASure:VMIN" on page 632

• ":MEASure:VAMPlitude" on page 628

Keysight Technologies InfiniiVision 4000 X Series User Manual

Questions and Answers: