Keysight Technologies InfiniiVision 4000 X Series

830 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
30 :SAVE Commands
:SAVE:IMAGe:FORMat
(see page 1610)
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {{BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is currently
selected.
See Also • "Introduction to :SAVE Commands" on page 824
• ":SAVE:IMAGe[:STARt]" on page 828
• ":SAVE:IMAGe:FACTors" on page 829
• ":SAVE:IMAGe:INKSaver" on page 831
• ":SAVE:IMAGe:PALette" on page 832
• ":SAVE:WAVeform:FORMat" on page 846