To Next Page

To Previous Page

:MEASure Commands 24

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 631

:MEASure:VMAX

(see page 1610)

Command Syntax

:MEASure:VMAX [<source>]

<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}

<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

The :MEASure:VMAX command installs a screen measurement and starts a

maximum vertical value measurement. If the optional source parameter is

specified, the current source is modified.

Query Syntax

:MEASure:VMAX? [<source>]

The :MEASure:VMAX? query measures and outputs the maximum vertical value

present on the selected waveform.

Return Format

<value> ::= maximum vertical value of the selected waveform in

NR3 format

See Also • "Introduction to :MEASure Commands" on page 568

• ":MEASure:SOURce" on page 615

• ":MEASure:VMIN" on page 632

• ":MEASure:VPP" on page 633

• ":MEASure:VTOP" on page 636

Keysight Technologies InfiniiVision 4000 X Series User Manual

Questions and Answers: