888 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:CAN:FDSTandard
(see page 1610)
Command Syntax
:SBUS<n>:CAN:FDSTandard <std>
<std> ::= {ISO | NISO}
The :SBUS<n>:CAN:FDSTandard command lets you pick the standard that will be
used when decoding or triggering on FD frames, ISO, or non-ISO.
This setting has no effect on the processing of non-FD (classical) frames.
Query Syntax
:SBUS<n>:CAN:FDSTandard?
The :SBUS<n>:CAN:FDSTandard? query returns the selected CAN FD frame
decode standard.
Return Format
<std<NL>
<std> ::= {ISO | NISO}
See Also • ":SBUS<n>:CAN:FDSPoint" on page 887
To Next Page
Loading...
