1162 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:GLITch:QUALifier
(see page 1610)
Command Syntax
:SEARch:GLITch:QUALifier <operator>
<operator> ::= {GREaterthan | LESSthan | RANGe}
This command sets the mode of operation of the glitch (pulse width) search. The
oscilloscope can search for a pulse width that is greater than a time value, less
than a time value, or within a range of time values.
Query Syntax
:SEARch:GLITch:QUALifier?
The :SEARch:GLITch:QUALifier? query returns the glitch (pulse width) qualifier.
Return Format
<operator><NL>
<operator> ::= {GRE | LESS | RANG}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:GLITch:SOURce" on page 1164
• ":SEARch:MODE" on page 1153
To Next Page
Loading...
