1384 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :TRIGger Commands
:TRIGger:TV:UDTV:HTIMe
(see page 1610)
Command Syntax
:TRIGger:TV:UDTV:HTIMe <time>
<time> ::= seconds in NR3 format
When the Generic video trigger's horizontal sync control is enabled, the
:TRIGger:TV:UDTV:HTIMe command sets the minimum time the horizontal sync
pulse must be present to be considered valid.
Query Syntax
:TRIGger:TV:UDTV:HTIMe?
The :TRIGger:TV:UDTV:HTIMe query returns the horizontal sync time setting.
Return Format
<time><NL>
<time> ::= seconds in NR3 format
See Also • ":TRIGger:TV:STANdard" on page 1381
• ":TRIGger:TV:UDTV:HSYNc" on page 1383
To Next Page
Loading...
