:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 861
:SBUS<n>:A429:BASE
(see page 1610)
Command Syntax
:SBUS<n>:A429:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:A429:BASE command selects between hexadecimal and binary
display of the decoded data.
The BASE command has no effect on the SDI and SSM fields, which are always
displayed in binary, nor the Label field, which is always displayed in octal.
Query Syntax
:SBUS<n>:A429:BASE?
The :SBUS<n>:A429:BASE? query returns the current ARINC 429 base setting.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:MODE" on page 857
• ":SBUS<n>:A429:FORMat" on page 866
To Next Page
Loading...
