406 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
16 :DISPlay Commands
:DISPlay:ANNotation<n>:COLor
(see page 1610)
Command Syntax
:DISPlay:ANNotation<n>:COLor <color>
<color> ::= {CH1 | CH2 | CH3 | CH4 | DIG | MATH | REF | MARKer | WHITe
| RED}
<n> ::= an integer from 1 to 10 in NR1 format.
The :DISPlay:ANNotation<n>:COLor command specifies the annotation color. You
can choose white, red, or colors that match analog channels, digital channels,
math waveforms, reference waveforms, or markers.
Query Syntax
:DISPlay:ANNotation<n>:COLor?
The :DISPlay:ANNotation<n>:COLor? query returns the specified annotation color.
Return Format
<color><NL>
<color> ::= {CH1 | CH2 | CH3 | CH4 | DIG | MATH | REF | MARK | WHIT
| RED}
See Also • ":DISPlay:ANNotation<n>" on page 404
• ":DISPlay:ANNotation<n>:TEXT" on page 407
• ":DISPlay:ANNotation<n>:BACKground" on page 405
• ":DISPlay:ANNotation<n>:X1Position" on page 408
• ":DISPlay:ANNotation<n>:Y1Position" on page 409
• "Introduction to :DISPlay Commands" on page 403
To Next Page
Loading...
