:POWer Commands 28
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 749
:POWer:INRush:NEXT
(see page 1610)
Command Syntax
:POWer:INRush:NEXT
The :POWer:INRush:NEXT command goes to the next step of the inrush current
analysis.
This command is equivalent to pressing the Next softkey on the oscilloscope front
panel when prompted during the analysis.
See Also • ":POWer:INRush:APPLy" on page 747
• ":POWer:INRush:EXIT" on page 748
• ":POWer:ITYPe" on page 750
To Next Page
Loading...
