Keysight Technologies InfiniiVision 4000 X Series User Manual

:TRIGger Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1371
:TRIGger:TRANsition Commands
The :TRIGger:TRANsition commands set the rise/fall time trigger options.
Table 162 :TRIGger:TRANsition Commands Summary
Command Query Options and Query Returns
:TRIGger:TRANsition:Q
UALifier <qualifier>
(see page 1372)
:TRIGger:TRANsition:Q
UALifier? (see
page 1372)
<qualifier> ::= {GREaterthan |
LESSthan}
:TRIGger:TRANsition:S
LOPe <slope> (see
page 1373)
:TRIGger:TRANsition:S
LOPe? (see page 1373)
<slope> ::= {NEGative | POSitive}
:TRIGger:TRANsition:S
OURce <source> (see
page 1374)
:TRIGger:TRANsition:S
OURce? (see page 1374)
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:TRANsition:T
IME <time>[suffix]
(see page 1375)
:TRIGger:TRANsition:T
IME? (see page 1375)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English