:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1031
:SBUS<n>:NRZ:STARt
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:STARt <#bits>
<#bits> ::= from 0-255, in NR1 format
The :SBUS<n>:NRZ:STARt command specifies the number of start bits for the NRZ
signal.
Query Syntax
:SBUS<n>:NRZ:STARt?
The :SBUS<n>:NRZ:STARt? query returns the number of start bits setting.
Return Format
<#bits><NL>
See Also • ":SBUS<n>:NRZ:DISPlay" on page 1023
• ":SBUS<n>:NRZ:DSIZe" on page 1024
• ":SBUS<n>:NRZ:FSIZe" on page 1025
• ":SBUS<n>:NRZ:HSIZe" on page 1026
• ":SBUS<n>:NRZ:TSIZe" on page 1035
• ":SBUS<n>:NRZ:WSIZe" on page 1036
To Next Page
Loading...
