1274 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
33 :SYSTem Commands
:SYSTem:RLOGger:STATe
(see page 1610)
Command Syntax
:SYSTem:RLOGger:STATe {{0 | OFF} | {1 | ON}}
The :SYSTem:RLOGger:STATe command enables or disables remote command
logging.
Query Syntax
:SYSTem:RLOGger:STATe?
The :SYSTem:RLOGger:STATe? query returns the remote command logging state.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SYSTem:RLOGger" on page 1270
• ":SYSTem:RLOGger:DESTination" on page 1271
• ":SYSTem:RLOGger:DISPlay" on page 1272
• ":SYSTem:RLOGger:FNAMe" on page 1273
• ":SYSTem:RLOGger:TRANsparent" on page 1275
• ":SYSTem:RLOGger:WMODe" on page 1276
To Next Page
Loading...
