:TRIGger Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1341
:TRIGger:NFC:ATTime
(see page 1610)
Query Syntax
:TRIGger:NFC:ATTime?
The :TRIGger:NFC:ATTime? query returns the time between the arm and the
trigger when the ATRigger (Arm & Trigger) trigger event is selected.
Return Format
<time><NL>
<time> ::= seconds in NR3 format
See Also • ":TRIGger:NFC:AEVent" on page 1340
• ":TRIGger:NFC:SOURce" on page 1343
• ":TRIGger:NFC:RPOLarity" on page 1342
• ":TRIGger:NFC:STANdard" on page 1344
• ":TRIGger:NFC:TEVent" on page 1345
• ":TRIGger:NFC:TIMeout" on page 1347
• ":TRIGger:NFC:TIMeout:ENABle" on page 1348
• ":TRIGger:NFC:TIMeout:TIME" on page 1349
To Next Page
Loading...
