976 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:LIN:PARity
(see page 1610)
Command Syntax
:SBUS<n>:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id field in
the LIN decode bus.
Query Syntax
:SBUS<n>:LIN:PARity?
The :SBUS<n>:LIN:PARity? query returns the current LIN parity bits display setting
of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:LIN Commands" on page 973
To Next Page
Loading...
