Keysight Technologies InfiniiVision 4000 X Series User Manual

:WAVeform Commands 36
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1425
:WAVeform:XINCrement
(see page 1610)
Query Syntax
:WAVeform:XINCrement?
The :WAVeform:XINCrement? query returns the x-increment value for the currently
specified source. This value is the time difference between consecutive data points
in seconds.
Return Format
<value><NL>
<value> ::= x-increment in the current preamble in 64-bit
floating point NR3 format
See Also • "Introduction to :WAVeform Commands" on page 1396
• ":WAVeform:PREamble" on page 1410
Example Code • "Example Code" on page 1411

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English