Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 897
:SBUS<n>:CAN:TRIGger:IDFilter
(see page 1610)
Command Syntax
:SBUS<n>:CAN:TRIGger:IDFilter {{0 | OFF} | {1 | ON}}
The :SBUS<n>:CAN:TRIGger:IDFilter command specifies, in certain error and bit
trigger modes, whether triggers are filtered by CAN IDs.
Query Syntax
:SBUS<n>:CAN:TRIGger:IDFilter?
The :SBUS<n>:CAN:TRIGger:IDFilter? query returns the CAN trigger ID filter
setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SBUS<n>:CAN:TRIGger" on page 894

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English