:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1169
:SEARch:PEAK:THReshold
(see page 1610)
Command Syntax
:SEARch:PEAK:THReshold <level>
<level> ::= necessary level to be considered a peak, in NR3 format.
The :SEARch:PEAK:THReshold command specifies the threshold level necessary to
be considered a peak.
The threshold level units are specified by the :FUNCtion<m>[:FFT]:VTYPe
command.
Query Syntax
:SEARch:PEAK:THReshold?
The :SEARch:PEAK:THReshold? query returns the specified threshold level for FFT
peak search.
Return Format
<level><NL>
<level> ::= in NR3 format.
See Also • ":FUNCtion<m>[:FFT]:VTYPe" on page 482
• ":SEARch:PEAK:EXCursion" on page 1166
• ":SEARch:PEAK:NPEaks" on page 1167
• ":SEARch:PEAK:SOURce" on page 1168
To Next Page
Loading...
