EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1144 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:USBPd:TRIGger:HEADer:DMESsage
(see page 1610)
Command Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:DMESsage <type>
<type> ::= {SRCap | REQuest | BIST | SNCap | BSTatus | ALERt | GCINfo
| VDEFined}
When the Header Content trigger mode is selected (with the
":SBUS<n>:USBPd:TRIGger HEADer" command) and the Data Message header type
is selected (with the ":SBUS<n>:USBPd:TRIGger:HEADer DMESsage" command),
the :SBUS<n>:USBPd:TRIGger:HEADer:DMESsage command selects the data
message type:
SRCap — Source_Capabilities
REQuest — Request
•BIST BIST
SNCap — Sink_Capabilities
BSTatus — Battery_Status
•ALERt Alert
GCINfo — Get_Country_Info
VDEFined — Vendor_Defined
Query Syntax
:SBUS<n>:USBPd:TRIGger:HEADer:DMESsage?
The :SBUS<n>:USBPd:TRIGger:HEADer:DMESsage? query returns the selected
data message type.
Return Format
<type><NL>
<type> ::= {SRC | REQ | BIST | SNC | BST | ALER | GCIN | VDEF}
See Also ":SBUS<n>:USBPd:SOURce" on page 1138
":SBUS<n>:USBPd:TRIGger" on page 1139
":SBUS<n>:USBPd:TRIGger:HEADer" on page 1140
":SBUS<n>:USBPd:TRIGger:HEADer:CMESsage" on page 1142
":SBUS<n>:USBPd:TRIGger:HEADer:EMESsage" on page 1145
":SBUS<n>:USBPd:TRIGger:HEADer:VALue" on page 1147
":SBUS<n>:USBPd:TRIGger:HEADer:QUALifier" on page 1148

Table of Contents

Related product manuals