Keysight Technologies InfiniiVision 4000 X Series User Manual

1132 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:USB:TRIGger:PID:SPECial
(see page 1610)
Command Syntax
:SBUS<n>:USB:TRIGger:PID:SPECial <pid>
<pid> ::= {PING | PRE | ERR | SPLit}
The :SBUS<n>:USB:TRIGger:PID:SPECial command specifies the USB special PID
to trigger on for the selected bus.
The specified PID does not include the PID check value, which is specified using
the :SBUS<n>:USB:TRIGger:PIDCheck command.
The SPECial USB trigger mode can be selected using the :SBUS<n>:USB:TRIGger
command.
Query Syntax
:SBUS<n>:USB:TRIGger:PID:SPECial?
The :SBUS<n>:USB:TRIGger:PID:SPECial? query returns the specified special PID.
Return Format
<pid><NL>
<pid> ::= {PING | PRE | ERR | SPL}
See Also • ":SBUS<n>:USB:TRIGger:PCHeck" on page 1129
• ":SBUS<n>:USB:TRIGger" on page 1120

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English