Keysight Technologies InfiniiVision 4000 X Series

1476 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
37 :WGEN<w> Commands
:WGEN<w>:TRACk:PHASe
(see page 1610)
Command Syntax
:WGEN<w>:TRACk:PHASe <phase>
<w> ::= 1 to (# WaveGen outputs) in NR1 format
<phase> ::= -360 to +360 in NR1 format
The :WGEN<w>:TRACk:PHASe command sets the phase relationship of a
frequency-tracked waveform generator output.
Query Syntax
:WGEN<w>:TRACk:PHASe?
The :WGEN<w>:TRACk:PHASe? query returns the frequency-tracked waveform
phase relationship setting.
Return Format
<phase><NL>
<phase> ::= -360 to +360 in NR1 format
See Also • ":WGEN<w>:TRACk" on page 1472
• ":WGEN<w>:TRACk:AMPLitude" on page 1473
• ":WGEN<w>:TRACk:FREQuency" on page 1475
• ":WGEN<w>:TRACk:CSIGnal" on page 1474