:WGEN<w> Commands 37
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1441
:WGEN<w>:ARBitrary:DATA:CLEar
(see page 1610)
Command Syntax
:WGEN<w>:ARBitrary:DATA:CLEar
<w> ::= 1 to (# WaveGen outputs) in NR1 format
The :WGEN<w>:ARBitrary:DATA:CLEar command clears the arbitrary waveform
memory and loads it with the default waveform.
See Also • ":WGEN<w>:ARBitrary:DATA" on page 1437
• ":WGEN<w>:ARBitrary:DATA:DAC" on page 1442
• ":SAVE:ARBitrary[:STARt]" on page 825
• ":RECall:ARBitrary[:STARt]" on page 812
Example Code • "Example Code" on page 1437
To Next Page
Loading...
