Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1057
:SBUS<n>:SENT:SIGNal<s>:ORDer
(see page 1610)
Command Syntax
:SBUS<n>:SENT:SIGNal<s>:ORDer <order>
<s> ::= 1-6, in NR1 format.
<order> ::= {MSNFirst | LSNFirst}
The :SBUS<n>:SENT:SIGNal<s>:ORDer command specifies the nibble order of the
signal being defined, either Most Significant Nibble first, or Least Significant
Nibble first.
Fast Signal definition examples:
Query Syntax
:SBUS<n>:SENT:SIGNal<s>:ORDer?
The :SBUS<n>:SENT:SIGNal<s>:ORDer? query returns the nibble order setting.
Return Format
<order><NL>
<order> ::= {MSNF | LSNF}
See Also • ":SBUS<n>:SENT:CLOCk" on page 1040
• ":SBUS<n>:SENT:CRC" on page 1041
• ":SBUS<n>:SENT:DISPlay" on page 1042
• ":SBUS<n>:SENT:FORMat" on page 1044
• ":SBUS<n>:SENT:IDLE" on page 1046
• ":SBUS<n>:SENT:LENGth" on page 1047
• ":SBUS<n>:SENT:PPULse" on page 1048
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 1050
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 1051
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 1053

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English